Welcome to Pushbumper.com | home

Wheellift Specifications:

Lift Rating: 3500 lbs. King Pin: 2”x5”

Tow Rating: 7500 lbs. Hinge Pin: 1”x8”

Weight: WL-1151 390 lbs. WL-1000L 550 lbs. WL-1000 560 lbs. WL-1075 480 lbs.

Hinge Boom: 5” Square Stinger Extension: 32”

Ram (stinger): 4 3/8”x4” with 2 UHMW Wear Pads for low friction extension.

Ratchet Straps: 1 pr. 2” straps with Oversized Handles and 5,000 lb. Wire Hooks

The Reinforced Pivot Crossbar features plunger locks that prevent accidental fork arm removal.

With Forks removed or rotated out of the way, the Pivot Cross Bar is approx 57” from the Rear Axle Housing.

The Standard Boom Support Nest mounts on tailboards up to 20” above the ground.

The optional Extended Boom Support Nest mounts on tailboards up to 30” above the ground.

The Standard Crossmember is designed for 34” wide frame rails.

The optional 38” Crossmember is for Dodge trucks and some non cab-chassis frames.

The Standard Frame Mounting Brackets are designed for chassis frames up to 31” above ground.

The optional Extended Frame Brackets will reach chassis frames up to 35” above the ground.

All mounting hardware and installation instructions are included.

Optional Trailer Hitch Mounting Plate for installation of a Trailer Ball.

The WL-1151 also includes a lifting chain for raising and lowering the wheellift when using a Tow Sling.

Hydraulic Systems:

System Pressure: 3000 psi. max. 1500 psi. typical under load, full pressure up, in and out, 500 psi limit down.

A Flow Control Valve regulates the hydraulic flow when lowering under load for a smooth descent.

Hoses: Parker Parflex 3/8” 3000 psi. rated, all included with Electric/Hydraulic models.

Lift Cylinders: 2 1/2”x10” (2) Ram Cylinder: 2”x32” (1)

Electric/Hydraulic Power Pack Ratings:

Gal/Min Amps

@ 3000 psi. .8 175

@ 1500 psi. 1.2 125

3000 psi. Relief Valve

Click below to go back to